Ana içeriğe geç

20. Adımdaki Değişiklikler

Düzenleyen: Alex Diaz-Kokaisl

Düzenleme onaylandı tarafından Alex Diaz-Kokaisl

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[title] Separate the bottom adhesive
+[* black] Insert a new opening pick into the gap you just created on the bottom edge of the iPad.
+[* black] Slide the pick over the antenna, stopping just before the home button.
+ [* icon_caution] Only slide the pick towards the home button and not away from it, as you may damage the antenna.
+ [* icon_note] If you need to slide the pick over this section again, remove and re-insert it at the bottom-left corner.
+[* black] Leave the pick to the left of the home button before continuing.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi