Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: S. Leng

Düzenleme onaylandı tarafından S. Leng

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Insert wisdom here.
+[* black] Once the ten remaining screws are removed, proceed to dislodge and remove the back panel. (Note: it may be helpful to use the Phillips screwdriver to pry the back cover off, starting from the bottom edge).
+[* black] Also make sure to detach the camera film strip from the motherboard by using a pair of small tweezers to unhook the clip that is holding the strip.