Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: johann beda

Düzenlenme reddedildi tarafından Adam O'Camb

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socketsocket, parallel with the board towards the top of the iMac.
[* black] Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socketsocket, parallel with the board towards the top of the iMac.
[* black] De-route the cable from the gap between the hard drive and logic board.
[* icon_note] If the gap between the hard drive and logic board is too narrow for the speaker cable, disconnect it and leave the cable in place.