How to Replace Your iPhone Rear Glass Adhesive 14 No'lu Adım Geçmişi

	[title] Connect the battery
	[* black] Use the flat end of your spudger or your finger to reconnect the battery.
-	[* black] Hook ~~the top edge of~~ the battery connector cover onto its ~~[link\|https://guide-images.cdn.ifixit.com/igi/nrwJQTOm6vQQRrZh.huge\|~~slot ~~above~~ the ~~connectors\|new_window=true] and align the cover with its screw posts in the frame~~.
-	[* black] Use your tri-point Y000 driver to install the ~~two 1~~.~~3 mm screws.~~
+	[* black] Hook the battery connector cover onto its slot on the logic board.
+	[* black] Use your tri-point Y000 driver to install the screws and secure the cover.
	[* black] Power on your iPhone and test it to make sure everything works before sealing it up. Power it back down before finishing this repair.