Bu Adımdaki Değişiklikler
Düzenleyen: Carsten Frauenheim —
Düzenleme onaylandı tarafından Carsten Frauenheim
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Foam pad | |
| - | [* icon_note] If your new screen assembly comes with a foam pad you can skip this step. If not you’ll need to |
| + | [* icon_note] If your new screen assembly comes with a foam pad preinstalled in the camera recess, you can skip this step. If not, you’ll need to transfer the foam pad onto the new assembly. |
| [* black] Use a pair of tweezers to carefully peel the foam off of the frame to remove it. | |
| - | [* icon_note] The foam pad in the camera recess is held in place with mild adhesive. |
| - | [* icon_reminder] During reassembly, install the foam pad on the new screen assembly by lightly pressing it down. Use adhesive tape if necessary. |
| + | [* icon_note] The foam pad is held in place with mild adhesive. |