3. Adımdaki Değişiklikler
Düzenleyen: Anthony @ ATUS —
Düzenleme onaylandı tarafından Anthony @ ATUS
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [title] Perform Mechanical Reset |
|---|---|
| + | [* red] With your right hand, hold the tone arm in the rest so that it does not move. |
| + | [* green] With your left hand, slowly rotate the platter clockwise until you hear a series of clicks. |
| + | [* icon_note] After hearing the series of clicks, the cam gear assembly should not rotate while you continue to rotate the platter - if the cam gear is still rotating, press the stop button again and repeat step 3. |
| + | [* light_blue] Cam gear assembly - white gear visible through holes of the platter. |
| + | [* icon_caution] Allowing the tone arm to move freely during this process can result in the stylus being broken. |
Resim 1
Önceki resim yok
Eklendi