26. Adımdaki Değişiklikler
Düzenleyen: Nathan Ruffing —
Düzenleme onaylandı tarafından Nathan Ruffing
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [title] Remove Anti-Shake Unit Note |
|---|---|
| + | [title] Remove Anti-Shake Unit - Important Note |
| [* black] The photo is with the anti-shake unit taken off. | |
| [* black] BEFORE YOU TAKE THE ANTI-SHAKE OFF, be prepared to mark the numbers and locations of the shim washers. There are three positions for washers and each spot can have up to 2 washers. Mine had a total of 4 washers. The markings are the thickness in 1/100th mm and on reassembly, they should go back in the same place. | |
| [* black] These washers set the flatness of the sensor to the front of the camera / lens. |