Mavic 2 Controller Joystick Replacement 3 No'lu Adım Geçmişi

	[* black] Use a Phillips #0 screwdriver to remove the two 5.7 mm screws that are secure the top cover.
-	[* red] Remove the cable connecting the joystick to the board with a pair of tweezers.
+	[* red] Remove the cable connecting the joystick to the board with a pair of [product\|IF145-020\|tweezers].
	[* icon_note] There is a cable on both sides, so get both.
	[* black] Go around the top cover, undoing all clips holding the top cover on. Insert the opening tool in between the top cover and the lower base of the controller.