Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[title] Disconnect the face sensor
+[title] Reposition the eyepiece trim
[* icon_caution] Don’t try to fully remove the eyepiece trim in this step. It’s still connected to the headset by a short cable.
-[* black] Lift the eyepiece trim up slightly and tilt it towards the top edge of the headset.
+[* black] Lift the eyepiece trim slightly and tilt it towards the top edge of the headset.
[* black] Set the trim down on your work surface, making sure not to strain the cable.