Rozia HQ242 Trimmer Spring Replacement 4 No'lu Adım Geçmişi

-	[* red] ~~In order to reinstall the replacement spring back into its slot, align~~ the flat U-shaped end of the spring to the notch on the trimmer.
-	[* black] ~~Grip the spring by gently pinching~~ the two legs with your thumb and index finger, ~~and align the legs so that they~~ point towards the front of the trimmer at a 45 degree angle, ~~and~~ drop it into the slot.
-	[* black] Once it is successfully in, carefully let go. If it falls off the notch, you will have to wedge it out and try again. This may take multiple attempts!
-	[* icon_~~caution~~] Make sure that the spring is securely resting on the notch, or the trimmer may not function properly!
+	[* red] Align the flat U-shaped end of the spring to the notch on the trimmer.
+	[* black] Gently pinch the two legs of the spring with your thumb and index finger, aligning them to point towards the front of the trimmer at a 45-degree angle, then drop it into the slot.
+	[* black] Once it is successfully in, carefully let go. If it falls off the notch, you will have to wedge it out and try again. This may take multiple attempts.
+	[* icon_note] Make sure that the spring is securely resting on the notch, or the trimmer may not function properly!