Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Nick Schultz

Düzenleme onaylandı tarafından Nick Schultz

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_note] The bottom edge of the bezel is held in place with strong adhesive and clips.
-[* icon_caution] Ensure you're separating the bottom edge of the bezel from the protective film, and not the protective film from the screen. If the film starts to peel up, gently press it back into place before you continue peeling up the bezel.
+[* icon_caution] Ensure you're separating the bottom edge of the bezel from the protective film and not the protective film from the screen. If the film starts to peel up, gently press it back into place before you continue peeling up the bezel.
[* black] Use your fingers to slowly peel the bottom edge of the bezel from the protective film on the display.
[* icon_note] If you're having a hard time separating the adhesive, use your opening pick to slice through the adhesive, being very careful not to cut the film. If it is still difficult, [guide|25705|use an iOpener|new_window=true] or [guide|157348|hair dryer|new_window=true] to lightly heat the bottom edge of the bezel.