Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Sam Gustafson

Düzenleme onaylandı tarafından Sam Gustafson

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[title] Remove front leatherette
+[* black] Use isopropyl alcohol to soften the adhesive along the edge of the leatherette.
+[* black] Use a dull spudger or scraper to peel off the covering.
+[* red] Turn the self timer lever to the 9 o'clock position.
+[* black] Loosen the entire right side leatherette in the same manner, then work it over and around the self timer lever to remove.
+[* icon_note] ''Installation Notes:'' Use contact cement to reattach the leatherette. This should be the very last step in reassembly, after the camera has been fully tested.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi