3. Adımdaki Değişiklikler
Düzenleyen: Spencer Day —
Düzenleme onaylandı tarafından Spencer Day
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Remove the main board supports | |
| + | [* black] Flip your power station over. |
| + | [* icon_caution] Be very careful not to damage the surface‑mounted components on the main board during this step. |
| [* red] Use a Phillips screwdriver to remove the four 6 mm‑long screws securing the main board supports. | |
| [* black] Remove the main board supports. | |
| + | [* icon_reminder] During reassembly, make sure the beveled sides of the main board support screw holes are facing up. |
| + | [* icon_reminder] During reassembly, make sure the flat sides of the main board support screw holes are facing down. |