Eşyalarını Tamir Et Topluluk Mağaza

6. Adımdaki Değişiklikler

Düzenleyen: Carsten Frauenheim —

Düzenleme onaylandı tarafından Carsten Frauenheim

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Remove the UI board
-[* icon_note] Long pins on the main board [link|https://guide-images.cdn.ifixit.com/igi/2EXPpiejLTuMvpuI.full|plug into the UI board|new_window=true] and firmly secure it.
-[* black] With one hand, firmly secure the main board above your work surface.
- [* icon_caution] ***Don't press the board down against your work surface***, or you may damage the surface‑mounted components on the board.
+[* icon_note] Long pins on the main board [link|https://guide-images.cdn.ifixit.com/igi/2EXPpiejLTuMvpuI.full|plug into the UI board|new_window=true] and hold it in place.
+[* black] With one hand, hold on to the main board.
+ [* icon_caution] Don't press the board down against your work surface, or you may damage the surface‑mounted components on the board.
[* black] With your free hand, grip the UI board by its edges and firmly pull it straight away from the main board to disconnect it.
- [* icon_note] This may take significant force. Make sure the boards stay perpendicular to each other or the pins might get damaged.
+ [* icon_caution] Make sure the boards stay perpendicular to each other or the pins might get damaged.
[* icon_reminder] During reassembly:
- [* red] When pushing the UI board back into place, make sure the side opposite the sockets goes into its cutout on the main board. Otherwise, it will prevent the UI board from reconnecting fully.
+ [* red] When pushing the UI board back into place, make sure the side opposite the sockets goes into its cutout on the main board. Otherwise, it will prevent the UI board from fully seating.