3. Adımdaki Değişiklikler
Düzenleyen: Sarah Westberg —
Düzenleme onaylandı tarafından Sarah Westberg
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Slowly lift the camera mount from the device. | |
| - | [* red] Gently disconnect the camera cable from the motherboard. |
| + | [* red] Gently disconnect the camera cable from the cable connected to the motherboard. |
| [* black] Push on alternating sides of the connector and pull straight away from the socket. | |
| [* icon_note] If you're having trouble, try rocking the connector side-to-side to loosen it. | |
| [* icon_caution] Do not pull on the wire cables as this may cause damage. | |
| [* icon_note] The camera mount should now be disconnected from the drone. |