4. Adımdaki Değişiklikler
Düzenleyen: Alex Quigg —
Düzenleme onaylandı tarafından Alex Quigg
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Take the circuit board piece and the joystick connection and separate the pair. | |
| - | [* black] From the removal of these pieces, you can replace the joystick itself for replacement or the circuit board for replacement. |
| + | [* black] Take the joystick module itself and remove the four 8 mm screws that connect the joystick to the housing. |
| + | [* black] Unscrew the thumb stick from the module if a replacement is unneeded. |
| [* icon_caution] ''Caution: the circuit board is wired through glue. If the plastic spudger is unable to pry the glue off, use the metal spudger as a last resort'' |