7. Adımdaki Değişiklikler
Adım Satırları
| + | [title] Replacement Arm Screw |
|---|---|
| + | [* black] Now you need to remove the screw that holds the front arm in place. This screw is unique and should be set aside from all other screws. |
| + | [* black] Once you remove the screw, you should be able to pull the arm bearing out (2nd picture). This can be done by wedging something underneath of it and prying up. Alternatively, you can grab it with a pair of needle-nose pliers and pull it out. |
| + | [* black] Once the bearing is removed, the arm should become completely detached (aside from the wires). If you pull it out, you should notice a small rubber washer like the one in the red circle. Do not lose this washer. |
| + | [* black] ***NOTE:*** There is 1 of these screws on each side of the drone. You only need to remove the screw corresponding to the arm you are replacing. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi