/
Tezgahım

Cihazların için kılavuz, parça ve yanıtlara hızlı erişim edin

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Üye Ol
Giriş Yap

8. Adımdaki Değişiklikler

Düzenleyen: Wpmiley —

Düzenleme onaylandı tarafından Wpmiley

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Removing Bottom Plate
[* black] First, remove the plate shown in the 1st image. If you've been following the guide, you should have already removed the screws holding this plate in place.
[* black] Simply, pull it off of the drone. It should come off relatively easy.
-[* black] With the plate removed, you should see these 6 screws shown in the 2nd image. Unscrew and remove these screws.
-[* black] With the screw removed, the bottom plate should basically just fall off on its own. ***DO NOT PULL IT OFF.*** The wire shown in the 3rd image is still attached, if you pull the plate off, you will break it. We do not need to remove the plate entirely so you can just leave it attached.
+[* black] With the plate removed, you should see the 6 screws shown in the 2nd image. Unscrew and remove these screws.
+[* black] With the screws removed, the bottom plate should basically just fall off on its own. ***DO NOT PULL IT OFF.*** The wire shown in the 3rd image is still attached, if you pull the plate off, you will break it. We do not need to remove the plate entirely so you can just leave it attached.