iPad Air Wi-Fi Front Panel Replacement 4 No'lu Adım Geçmişi

	[title] Anti-Clamp instructions
	[* icon_note] The next two steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. *If you aren't using the Anti-Clamp, skip down two steps for an alternate method.*
	[* icon_note] For complete instructions on how to use the Anti-Clamp, [guide\|152309\|check out this guide\|new_window=true].
-	[* black] Elevate the iPad enough for the Anti-Clamp's ~~hinges~~ to rest above and below the screen.
+	[* black] Elevate the iPad enough for the Anti-Clamp's arms to rest above and below the screen.
	[* black] Pull the blue handle towards the hinge to disengage opening mode.
-	[* black] Position the suction cups near the left edge of the ~~screen~~—one on the front, and one on the back.
+	[* black] Position the suction cups near the left edge of the iPad—one on the front, and one on the back.
	[* black] Push down on the cups to apply suction to the desired area.
	[* icon_note] If you find that the surface of your device is too slippery for the Anti-Clamp to hold onto, you can use packing tape to create a grippier surface.