4. Adımdaki Değişiklikler
Düzenleyen: Walter Galan —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_note] For enough clearance to remove the hard drive, the logic board must be slightly removed. To accomplish this, two cylindrical rods must be inserted into the holes highlighted in red. | |
| - | [* icon_caution] Inserting instruments into any logic board holes other than the ones highlighted in red may |
| + | [* icon_caution] Inserting instruments into any logic board holes other than the ones highlighted in red may severely damage the logic board. |
| [* black] Insert two tools having a maximum diameter of 2.5 mm into the holes highlighted in red. Be sure they make contact with the outer case below the logic board before proceeding. | |
| - | [* black] Carefully pry the tools toward the I/O board. The logic board |
| + | [* black] Carefully pry the tools toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case. |
| [* black] Cease prying when the I/O board is visibly separated from the outer case. Remove the two tools. |