4. Adımdaki Değişiklikler
Düzenleyen: Lawrence Zhu —
Düzenleme onaylandı tarafından Lawrence Zhu
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [title] Insert fan |
|---|---|
| - | [* black] Place the replacement fan on the extruder assembly in the right orientation |
| + | [title] Insert replacement fan |
| + | [* black] Place the replacement fan on the extruder assembly in the right orientation. |
| [* red] Connect the cable make sure that it has a solid connection. | |
| [* icon_note] The fins of the fan should be directed to blow torwards the hot extruder shown in the picture, not away. | |
| [* orange] Secure the fan by screwing the top screws back into place in a clockwise rotation. | |
| [* icon_reminder] Finish by putting the plastic top back on. |