5. Adımdaki Değişiklikler
Adım Satırları
| + | [title] Remove caliper |
|---|---|
| + | [* black] Wiggle the caliper out and off of the pads/rotor, and place out of the way - do not let it dangle by the brake hose. |
| + | [* icon_reminder] Use the brake spreader tool on the front or the caliper wind back tool on the rear to push the piston back into the caliper for assembly. |
| + | [* icon_caution] Pay close attention that the hose is not twisted when re-installing (flip caliper as necessary to remove twists). A twisted hose will overheat the brakes, causing damage and a reduction or loss of braking performance. |
Resim 1
Önceki resim yok
Eklendi