1. Adımdaki Değişiklikler
Düzenleyen: Kevin Savage —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Carefully peel off the tape that secures the SATA cable connector to the hard drive. |
|---|---|
| - | [* black] |
| + | [* black] Lift up the black connector ribbon to see the black oval shaped piece of tape. Carefully peel off the tape that secures the SATA cable connector to the hard drive. |
| + | [* black] The connector will now almost fall off. Simply pull it off. If it's not coming off, check the above step to ensure you've removed securing tape. |
| [* black] Carefully peel off the two black sticky pads (one visible in picture) from the hard drive and stick them to your new hard drive in the same locations. |