1. Adımdaki Değişiklikler
Düzenleyen: bushing —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] Carefully peel back the two copper sticky grounding strips near the LED module. |
|---|---|
| + | [* black] Swing the outer aluminium case up and carefully slide it towards the connector side of the logic board until it comes off. Remove the two Phillips #0 screws securing the LED module. |
| + | [* black] Carefully unplug the module from the logic board to make it easier to work on, and remove it from the case. |