| - | [* icon_caution] Zero insertion force connectors can break easily. Before performing these steps, read the [http://edu.ifixit.com/Guide/Recognizing+%26+Disconnecting+Cable+Connectors/11#s82|iFixit Guide to Recognizing and Disconnecting Cable Connectors] to find out how to safely remove them. |
|---|
| - | [* black] Use the tip of the Spudger to disconnect the two zero insertion force connectors on the bottom and top of the motherboard. |
|---|
| + | [* icon_caution] Zero insertion force connectors can break easily. Before performing this step, read the [http://edu.ifixit.com/Guide/Recognizing+%26+Disconnecting+Cable+Connectors/11#s82|iFixit Guide to Recognizing and Disconnecting Cable Connectors] to find out how to safely remove them. |
|---|
| + | [* black] Use the tip of the spudger to disconnect the two zero insertion force connectors on the bottom and top of the motherboard. |
|---|
| + | [* black] The first connector is attached to an orange tape, and is located in the bottom-right corner of the motherboard. Remove this connector. |
|---|
| + | [* black] The second connector is long and thin, and is located at the top of the motherboard, a bit to the right of center. Remove this connector. |
|---|