5. Adımdaki Değişiklikler
Düzenleyen: Justin Rosescu —
Düzenleme onaylandı tarafından Justin Rosescu
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] With your fingers, partially peel back the rubber molding near the button you want to replace. | |
| [* icon_caution] Do not rip the rubber mold. The mold will need to be used for the new button, and it must remain intact in order for the button to work properly. | |
| - | [* black] Using a small pointed spudger, scrape off the glue between the plastic button and the rubber mold. |
| + | [* black] Using the straight, pointed end of a small pointed spudger, scrape off the glue between the plastic button and the rubber mold. |