Boxee Box Teardown 8 No'lu Adım Geçmişi

	[* black] The wireless card assembly is composed of a Mini PCI-E wireless card and an interconnect board where the cable from the motherboard is connected.
	[* red] On the back side of the interconnect board we found a Nordic Semiconductor NRF24LU1P transceiver.
	[* black] This chip is most likely used to decode signals received from the awesome QWERTY wireless remote.
	[* black] We recently found the same chip in the Boxee's direct competitor, the [guide\|3788\|Logitech Revue\|stepid=17912].
	[* black] The Mini PCI-E wireless card employs a Broadcom BCM4319XKUBG.
-	[* black] An remote control antenna is printed into the interconnect board right below the Mini PCI-E socket. This is positioned near the top of the device when it is assembled to aid in remote reception.
+	[* black] An remote control antenna is printed into the interconnect board right below the Mini PCI-E socket. This is positioned near the top of the device when it is assembled to aid in remote control reception.