Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Donald MacTavish

Düzenlenme reddedildi tarafından Arthur Shi


Adım Satırları

[* black] Lift the trackpad cable up off the battery to separate it from the adhesive securing it.
[* icon_caution] Be careful not to damage the cable. If it doesn't peel up easily, apply a little heat from an iOpener, heat gun, or hair dryer to soften the adhesive, and try again.
+ [* icon_caution] There is no need to release the keyboard ZIF connector. In the photo this is below the thumb and over the foreground middle battery. Note lifted tape. If you have keyboard or trackpad issues you may have lifted the the tape on the ZIF and released the ZIF retainer. Make sure the black retaining bar is in the down position on the ZIF Connector.
+ [* black] New line.