Canon Powershot SD880 Back Cover Replacement 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Emma Hovley — 23 Nis 2019

Düzenleme onaylandı tarafından Dan

-	[* yellow] Remove the 2 screws(2.~~41mm~~ long) on the side of the camera next to the LCD screen.
-	[* yellow] Remove the 2 screws(4.~~08mm~~) on the other side. One is located under the rubber USB flap.
-	[* yellow] Remove the last screw(2.~~59mm~~) located on the bottom of the camera.
+	[* yellow] Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen.
+	[* yellow] Remove the 2 screws (4.08 mm) on the other side. One is located under the rubber USB flap.
+	[* yellow] Remove the last screw (2.59 mm) located on the bottom of the camera.
	[* black] Slowly pull the back cover of the camera.