/
Tezgahım

Cihazların için kılavuz, parça ve yanıtlara hızlı erişim edin

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Üye Ol
Giriş Yap

Bu Adımdaki Değişiklikler

Düzenleyen: Michaela Gergel —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Tools required: #00 Phillips-head screwdriver
-[* icon_caution] Caution: The screws removed in this step are tiny and should be handled carefully. There will be a total of three screws replaced during this step.
+[* icon_caution] Caution: The three screws reattached in this step are tiny and should be handled carefully.
[* icon_note] Note: the two screws on the bottom of the camera should be the longer screws, not the shorter ones.
-[* black] Using your #00 Phillips-head screwdriver, reattach the two screws located on the bottom of the camera and the one screw on the side of the camera. These screws hold the LCD screen in place (refer to pictures).
+[* black] Using the #00 Phillips-head screwdriver, reattach the two screws located on the bottom of the camera and the one screw on the side of the camera. These screws hold the LCD screen in place (refer to pictures).