Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Remove the 3.4 mm Phillips screw near the vibrator motor.
-[* orange] Use a small flathead screwdriver to remove the two 3.6 mm standoffs along the side of the logic board nearest the battery opening.
+[* orange] Remove the two 3.6 mm standoff screws along the side of the logic board nearest the battery opening.