Canon PowerShot A80 Back Cover Replacement 6 No'lu Adım Geçmişi

-	[* black] ~~Unscrew~~ the ~~bottom~~ screw on the side of the camera ~~using a #00 Phillips screwdriver, it is about 3~~.~~3mm long. This holds on the side panel as well as a back cover.~~
-	[* icon_note] ~~Remember in order to take off~~ the ~~back cover,~~ the ~~rubber cover below the screw has to be opened~~.
+	[* black] Remove the lower Phillips screw (shown) from the side of the camera.
+	[* icon_note] Open the little rubber door below this screw that covers the connectors.