Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: johnsawyercjs

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_caution] There's a trackpad and keyboard ribbon connecting the upper case to the logic board, so don't pull the upper case off entirely just yet.
-[* black] Starting near the display and working around to the front of the computer, pry up on the upper case. A [product|IF145-000|plastic opening tool] or a medium hard guitar pick may help you to do this.
-[* icon_note] The upper case is likely to stick at the connection above the optical drive. If this is the case, first free all other sides, then proceed to pull upward on the upper case from either side of the optical drive opening.
-[* icon_note] If you stand the base on end to get a better look you may displace the total of 4 grey plastic clips that hold the keyboard in place. Don't panic. They slide into slots at the top right-most edge near the CD drive.
-[* icon_reminder] During reassembly, make sure the clips on the right side click into place. They are different than the left side.
+[* icon_caution] There's a trackpad and keyboard ribbon cable connecting the upper case to the logic board, so don't pull the upper case off entirely just yet.
+[* black] Starting near the display and working around to the front of the computer, pry up on the upper case. A [product|IF145-000|plastic opening tool], expired plastic credit or similarly-thick card, or a medium hard guitar pick may help you to do this.
+[* icon_note] The upper case is likely to stick at the connection above the front edge of the optical drive. If this happens, first free all other sides, then proceed to pull upward on the upper case from either side of the optical drive opening.
+[* icon_note] If you stand the base on end to get a better look, you may displace the four grey plastic clips that hold the right side of the upper case in place. Don't panic. They slide into slots at the top rightmost edge of the lower frame, above the front edge of the optical drive.
+[* icon_reminder] During reassembly, make sure the clips on the right side click firmly into place. They're different from the clips on the left side, and so normally they require a little more pressure to click into place more firmly.