8. Adımdaki Değişiklikler
Düzenleyen: johnsawyercjs —
Düzenleme onaylandı tarafından Jake Devincenzi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* yellow] While holding up the upper case, pull up the black tab of the silver cable away from its connector. | |
| [* icon_note] If there is no black tab, you can also use a spudger to gently pry the connector from its housing. This connector is tall, so be sure to pry straight up. | |
| [* icon_note] If you happen to break your upper case cable when removing the upper case, we stock the [product|IF186-092|cable] individually and we have a [guide|4660|guide] that makes replacing it easy. | |
| - | [* icon_note] Upon reassembly, there are 4 grey plastic clips on the optical drive side of the keyboard (refer to picture). They must be installed in their slots for the keyboard to snap in properly. |
| + | [* black] While you have the upper case removed, you may want to take the opportunity to remove dust, hair, etc. It's best to use a can of compressed air, though if you use a brush, make sure that its bristles are made of a material (usually animal hair) that doesn't generate static electricity, which can destroy electronics. |
| + | [* icon_note] Upon reassembly, there are 4 grey plastic clips on the optical drive side of the keyboard (refer to second picture). They must be installed in their slots for the keyboard to snap in properly. |