Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Kelsea Weber

Düzenleme onaylandı tarafından Kelsea Weber

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Insert the flat edge of the spudger into the crease of the keyboard cover.
[* black] While the spudger is in the crease, carefully pry open the casing by sliding the spudger along the edge.
-[* icon_note] Do not use excessive force to pry open the lid. You should hear each plastic clip snap open as you run the spudger along the edge.
+[* icon_caution] Do not use excessive force to pry open the lid. You should hear each plastic clip snap open as you run the spudger along the edge.