8. Adımdaki Değişiklikler
Düzenleyen: Andrew Optimus Goldheart —
Düzenleme onaylandı tarafından Andrew Optimus Goldheart
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Next we go for the internals of the camera module. Again, just with the Torx. |
|---|---|
| - | [* black] The camera itself is an 8 megapixel CMOS camera with a 1/3.2 inch sensor and an aperture of f 2.2. |
| - | [* black] It is plugged into the pogo board with a simple connector and held in place with a soft double sided adhesive tape inside the plastic housing. |
| + | [* black] Up next, the rear camera module. Maybe in the future, this will be an individually upgradeable component? |
| + | [* black] The camera itself is an 8 megapixel CMOS camera with a 1/3.2 inch sensor and an aperture of ƒ2.2. |
| + | [* black] This module is built just like the others: a plastic case around an off the shelf component, connected to a pogo interface board via a traditional flex and connector. |
| + | [* icon_note] So while Fairphone hasn't removed the flex and connector, they have moved them a bit farther away from DIY fixers—greatly simplifying component swap repairs. |