5. Adımdaki Değişiklikler
Düzenleyen: Chris Ritson —
Düzenleme onaylandı tarafından Craig Lloyd
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Removing the print head | |
| [* black] Remove the springs that maintain the print head. | |
| [* black] Remove the print head by pulling on the ribbons. | |
| [* icon_note] In case you want to replace the print head, the spare part reference is: CN688A | |
| - | [* red] When inserting the print head after cleaning or replacing, make sure the horizontal plastic ribbon is between the plastic guides, as shown in the last picture. |
| + | [* red] When inserting the print head after cleaning or replacing, make sure the horizontal plastic ribbon is between the plastic guides, as shown in the last picture. Getting this wrong may cause the print head to jam when you put the power back on at the end. |