Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Mason Morgan

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* blue] Loosen the ribbon cables from the board.
[* blue] 1-Directly below the viewfinder
[* blue] 2-At the Base of the board
[* blue] 3-At the top right near the selector wheel. 1 on top of the board 2 on the underside.
[* blue] 1-The center of the board, above the central hole
-[* red] Use metal tweezers to remove the two white plastic clips from their sockets
+[* red] With metal tweezers, remove two white plastic clips from their sockets
[* icon_note] The bullets apply to the three pictures on the step