Olympus C-765 Flash Assembly Replacement 3 No'lu Adım Geçmişi

-	[* yellow] ~~Unscrew~~ the 3mm screw holding the flash in place
-	[* blue] ~~The~~ wires running out of the flash ~~will need to be cut and then~~ the new flash ~~unit spliced~~ into the preexisting wires.
-	[* black] ~~Now~~ you ~~can replace the entire~~ flash assembly.
-	[* icon_caution] ~~Beware of~~ the flash capacitor; it still carries a ~~good amount of~~ charge that could shock you or fry the boards
+	[* yellow] With a [[Item:Phillips 00 Screwdriver\|Phillips #00]] screwdriver, unscrew the 3mm screw holding the flash assembly in place by twisting counter-clockwise.
+	[* blue] Cut the wires running out from the flash assembly. When installing the new flash assembly, splice the new wires into the preexisting wires.
+	[* black] The camera is now ready for you to install a new flash assembly.
+	[* icon_caution] Be cautious when handling the flash capacitor; it still carries a charge that could shock you or fry the boards.