iPod Classic Battery Replacement 18 No'lu Adım Geçmişi

-	[* icon_note] *Here are the detailed pictures of the connector, which were requested so much in the comments*
+	[* icon_note] *Here are the detailed pictures of the battery connector, which were requested so much in the comments*
	[* icon_note] The connector is closed, when the top of the black or dark part is at the same level as the thin white plastic part, which is fixed to the main board
-	[* black] The connector can be opened carefully by using a very thin pair of tweezers and pulling only the black/dark part to the top (perhaps with a bit of very careful wiggling) in order to get it of its slightly locked closed position.
+	[* black] The connector can be opened carefully by using a very thin pair of tweezers and pulling only the black/dark part to the top (perhaps with a bit of very careful wiggling) in order to get it of its slightly locked closed position (see 1st picture).
	[* icon_caution] Be careful to grab and pull to the top only the dark part of the connector at the center of its short sides. Do not pull at the white parts, which are extending to the outer edges of the short sides of the connector (see 1st picture)
	[* icon_caution] Do not pull the black/dark part more than 1 mm to the top.
	[* black] At the open position of the connector the top of the black/dark part is about 1 mm above the top of the thin white part of the connector (see difference between 2nd and 3rd picture)
	[* black] The orange battery cable is inserted from the top and slightly inclined from the right side (see 1st picture). After opening the connector, it should be removed and inserted in this same direction. Hardly any force will be needed for extracting and for re-inserting the cable. White lines accross the cable allow assessing its correct positioning.