1. Adımdaki Değişiklikler
Düzenleyen: Taylor DeWitt —
Düzenleme onaylandı tarafından Taylor DeWitt
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Remove the t5 screwdriver head and replace it with the j000 screwdriver head from the toolkit. | |
| [* red] Disconnect all the wires from the circuit board. | |
| - | [* orange] Using the j000 screwdriver, remove all four screws from the circuit board and place them safely on the table (separate from the case ones) |
| + | [* orange] Using the j000 screwdriver, remove all four 5.1mm screws from the circuit board and place them safely on the table (separate from the case ones) |
| [* black] Gently pry circuit board from the bottom shell and place it gently on the work surface |