Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] With the three screws removed, take note of the two ribbon cables connecting the lens assembly to the main motherboard.
-[* red] Use the tweezers to remove the two green strips of tape protecting the connectors.
+[* red] Use the [product|IF145-020|tweezers] to remove the two green strips of tape protecting the connectors.
[* red] Use the plastic opening tool to release the black clips locking in the ribbon cables, then use the tweezers to gently pull the ribbon cables away from the main motherboard.