Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Use a plastic opening tool or tweezers to lift the green tape located on top of the LCD controller board.
+[* black] Use a plastic opening tool or [product|IF145-020|tweezers] to lift the green tape located on top of the LCD controller board.
[* red] Detach the two ribbon cables, by first lifting the black tab on top of the connector.
[* black] Pull the ribbon cables out of the connectors with tweezers or two fingers.