9. Adımdaki Değişiklikler
Düzenleyen: Phillip Takahashi —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
[* black] Guide the new filter back up and around the drive shaft, being careful not to get dirt or debris on the seal of the oil filter. | |
- | [* black] Place the threaded end of the oil filter onto the engine's oil filter threads and turn the filter clockwise by hand until it is snug. |
+ | [* black] Place the threaded end of the oil filter onto the engine's oil filter threads and turn the filter clockwise by hand until it is snug. It should require a moderate amount of your strength, but not all of it. |
[* icon_caution] If the filter is difficult to turn at the beginning of its threads, ***stop***! You may be cross threading the oil filter. Re-align the oil filter and try again. | |
+ | [* black] Do not over-tighten your oil filter by using a wrench. Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future. |
[* black] Remove the oil drain pan from under the car. |