1995-2001 Honda CRV Oil Change 13 No'lu Adım Geçmişi

-	[* black] Locate the oil dipstick. It is at the front of the engine along it's center line.
-	[* black] Pull out the oil dipstick, wipe it off, place it all the way back into it's hole and remove again.
-	[* black] Observe the oil level on the end of the dipstick. It should be between the two holes. If the oil is above the top hole, some oil will need to be drained. If the oil is below the bottom hole, or not visible, oil needs to be added.
-	[* black] Adjust oil level as necessary and place the dipstick back in it's hole when you are done.
+	[* black] Locate the oil dipstick. It is at the front of the engine along its center line.
+	[* black] Pull out the oil dipstick, wipe it off, place it all the way back into its hole and remove again.
+	[* black] Observe the oil level on the end of the dipstick. It should be between the two holes or slightly above the top one.
+	[* icon_note] This is not your actual oil level, but a pre-check to make sure the engine will not run dry when you first start it. The oil level will drop slightly after the first run when oil fills the new oil filter.
+	[* black] Place the oil dipstick all the way back in it's hole.