7. Adımdaki Değişiklikler
Düzenleyen: Phillip Takahashi —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] Place the threaded end of the oil filter onto the engine's oil filter threads, then turn the filter clockwise by hand until it is snug. Tightening the filter should require a moderate amount of your strength, but not all of it. |
|---|---|
| + | [* icon_caution] If the filter is difficult to turn at the beginning of its threads, stop! You may be cross threading the oil filter. Re-align the oil filter and try again. |
| + | [* icon_caution] Do not over-tighten your oil filter by using a wrench. Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future. |
| + | [* black] Remove the oil drain pan from under the bike. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi