Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Phillip Takahashi

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* black] Unbend the wire holder on the inside of the front right of the frame to get slack in the wires attached to the radiator.
+[* black] Carefully move the radiator to the right side of the bike, out of the way of the cylinder head.
+ [* icon_caution] The radiator is not completely disconnected from the bike, there are still wires connected to the thermo-switch and fan. Be sure that you do not put too much tension on these wires or you risk ripping them out of their sockets.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi