Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Using the PH00 screw driver, remove the two 3mm screws.
[* icon_note] These screws may be covered by small, round black stickers. Remove the stickers to continue.
-[* black] Remove the metal clip that connects the battery ribbon to the motherboard by lifting up. Precision tweezers work best for this part.
+[* black] Remove the metal clip that connects the battery ribbon to the motherboard by lifting up. Precision [product|IF145-020|tweezers] work best for this part.
[* icon_reminder] Be sure to only grab the metal clip with the tweezers, not the connector underneath.