Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Pump the jack handle up and down repeatedly to begin raising your vehicle.
+[* black] Pump the jack handle down and back up repeatedly to begin raising your vehicle.
[* icon_caution] It's best to watch the jack where it makes contact with the vehicle to make sure it stays seated properly as you raise it.
[* black] If this isn't practical, pause after raising the vehicle an inch or two and take a quick look to verify that the jack has made good contact with the jack point.
[* black] If necessary, lower the jack back down by slightly opening the release valve. Then close the release valve, and reposition the jack so that it makes better contact with the jack point.
-[* black] Continue raising your vehicle until it reaches the desired height. (This should be just high enough to allow you to put a jack stand in place.)
+[* black] Continue raising your vehicle until it reaches the desired heighthigh enough to allow you to put your jack stand(s) in place.