Eşyalarını Tamir Et Topluluk Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: Scott Havard —

Düzenleme onaylandı tarafından Scott Havard

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Carefully pry up the remaining, bottom portion of the press connector, which is lightly adhered to the home/Touch ID sensor cable beneath.
- [* icon_caution] Don't try to detach the press connector completely—simply separate the adhesive holding it in place.
+[* black] Use an opening pick to gently lift the press connector off of the home/Touch ID sensor cable beneath.
+ [* icon_caution] Don't try to detach the press connector completely—simply lift it up so that it is out of the way when removing the home/Touch ID sensor cable.